Westinghouse One-Light Adjustable Mini Pendant 6102700 Manuel d'instructions télécharger pdf

Mini-Pendant Kit

Installation and Safety Instructions

Warning: Be sure the electricity to the wires you are working on is shut off; either the fuse is removed

or the circuit breaker is shut off.

GENERAL

You don't need special tools to install this fixture. Be sure to follow the steps in the order given. Under no

circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on

a ceiling which contains a radiant type heating system. Read instructions carefully. If you are unclear as to

how to proceed, consult a qualified electrician.

INSTALLATION

Important: Do not attach fixture directly to outlet box.

Step 1: Thread mounting screw (A) into the matching hole of mounting bar (B).

Step 2: Secure the mounting bar (B) to outlet box with outlet box screws (C) (if applicable).

WIRING INSTRUCTIONS

Step 1: Wrap ground wire from fixture around green grounding screw stem leaving enough excess wire, then

connect the excess ground wire from the fixture with the grounding wire from outlet box by wire

connector, then wrap the wire connector with electrical tape for a more secure connection.

Step 2: Con

nect the black wire from the fixture with the black wire (live wire) from the outlet bo

x by wire connector,

and wrap the wire connector with electrical tape for a more secure connection.

Step 3: Connect the

white wire from the fixture with the white wire (neutral wire) from the outlet

box by wire

connector, and wrap the wire connector with electrical tape for a more secure connection.

Step 4: Tighten grounding screw. Do not over tighten.

FINAL ASSEMBLY

Step 1: After wires are connected, tuck them carefully inside outlet box. Raise canopy (D) allowing the

mounting screw (A) to protrude through the hole in the canopy (D), and secure with ball nut (E).

Step 2: To remove cage shade (H), carefully support bottom of cage shade (H) while removing screw nuts

(G) from fixture cover (F). Carefully lower cage shade (H).

Step 3: Install lamp. (Please do not exceed the maximum capacity recommended on the socket).

Step 4: Replace cage shade (H) and screw nuts (G).

CLEANING

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as

scouring pads or powders, steel wool or abrasive paper.

W-402

081514

Westinghouse Lighting, Philadelphia, PA 19154-1029, U.S.A.

www.westinghouselighting.com

, WESTINGHOUSE, and INNOVATION YOU CAN BE SURE OF

are trademarks of Westinghouse Electric Corporation.

Used under license by Westinghouse Lighting.

Made in China

1 2

Résumé du contenu

Page 1 - Mini-Pendant Kit

Mini-Pendant KitInstallation and Safety InstructionsWarning: Be sure the electricity to the wires you are working on is shut off; either the fuse is r

Page 2 - Minilámpara Colgante

Mini-Luminaire SuspenduInstallation et Instructions de SécuritéPour votre sécurité Mise en garde: veillez à ce que le courant soit coupé dans le circu

Commentaires sur ces manuels

Pas de commentaire

Westinghouse One-Light Adjustable Mini Pendant 6102700 Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Non Westinghouse One-Light Adjustable Mini Pendant 6102700. Westinghouse One-Light Adjustable Mini Pendant 6102700 Instruction Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non Westinghouse One-Light Adjustable Mini Pendant 6102700